Microsoft’s Windows 10 operating-system provides a large amount of compelling features, including Cortana and a new Start menu. However, a number of its default settings don’t provide you with the best performance or usability. From showing file extensions to enabling system protection backups, here are seven things you need to change once you get started with Windows 10 after you have properly setup the operating-system.
Enable System Protection / Produce a Restore Point
What happens should you install a bad bit of software or perhaps a defective driver and your computer starts acting strangely or you can’t even boot. You will want to revert Windows 10 to the previous system restore point, which will turn back the clock on your drivers, programs and settings to a time when the system worked perfectly. However, Windows 10 includes system protection disabled. If you want to protect yourself — and you ought to — set up restore points following a instructions below.
1. Look for “restore point” within the Windows search engine.
2. Launch “Create a restore point” in the results. You need to see a list of available drives.
3. Select the system drive and click Configure. The system drive is usually the C: drive and has the word “(System)” written after its volume name.
4. Toggle Restore Settings to “Turn on system protection,” set the utmost disk space usage by moving the slider and click on Ok. We recommend leaving 2 or 3 percent for restore pints but you might be able to get away with the cheapest (1 percent).
5. Click Create so that you create a preliminary restore point right away.
6. Name the initial restore point when prompted.
7. Click Close when it’s done.
If you need to restore from one of those points, you can click the System Restore button on the System Protection tab. If you cannot boot, you are able to hit F8 or Shift + F8 during boot to get at the emergency menu on some computers. On other PCs, if you’re able to a minimum of arrive at the sign in screen, you are able to hold down Shift while you select Restart.
Show File Extensions and Hidden Files
Automatically, Windows 10 hides most file extensions so, when you are going through your files, you can’t easily see what type of file they’re. Your quarterly report, for example, can look as “3dqreport” instead of “3dqreport.pptx” that can be a web site you saved will display as “homepage” rather than “homepage.htm” or “homepage.html.”
Microsoft has been disabling extensions by default within the last several versions of their OS inside a misguided effort to simplify the file system for users. However, this approach can create more problems of computer solves. For example, Recently i ran into a problem when linking to a font file because I referenced it as “myfont.ttf” when the hidden extension was at caps and also the real name was “myfont.TTF.”
In an effort to protect you from yourself, Microsoft also hides certain operating-system files of your stuff by default. But let’s say you have to find these files or edit these to troubleshoot? And should not you trust yourself not to delete important files? Here’s how to show extensions and hidden files in Windows 10.
1. Visit the user interface. You will get there by hitting Windows + X deciding on User interface
2. Open File Explorer Options. If you do not see the icon for this, alter the user interface view (in the upper right corner) to large or small icons.
3. Navigate to the View tab.
4. Toggle “Hidden files and folders” to “Show hidden files, folders and drives.”
5. Uncheck “Hide empty drives,” “Hide extensions for known file types” and “Hide protected operating-system files.”
6. Click Yes when warned about unhiding protected files.
7. Click Ok.
Disable User Account Control
Windows wants to wag a finger to you every time you try to install a program or change a vital setting by appearing a dialog box and causing you to click Alright to continue. Why warn you if you already know what you are doing? Good question. Disable User Account control to stop the needless, annoying dialog boxes.
1. Look for “user account control” within the search box.
2. Open “Change User Account Control settings.”
3. Slide the slider right down to “Never notify” and click on Ok.
4. Click Yes when prompted.
Disable the Lock Screen
Unless you possess a tablet and, even if you do, the Windows lock screen is an unnecessary decoration that makes clicking or swipe one extra time every time you boot or wake your pc. In order to unlock your pc, you need to dismiss the lock screen, however still need to enter passwords or PIN on the login screen. Why not just go straight to the login screen?
1. Open the registry editor. It can be done by typing regedit into the run box.
2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows.
3. Produce a registry key called Personalization if one doesn’t already exist. You may create a brand new key by right clicking within the right pane deciding on Key.
4. Produce a new DWORD value inside the Personalization key and referred to it as NoLockScreen.
5. Set NoLockScreen to 1. You place the value by double clicking on NoLockScreen, entering the amount and clicking Ok.
Change Your Default Browser
If you upgraded to Windows 10 from Windows 7 or Windows 8, you’ll notice that Microsoft Edge has become your default browser, even if Chrome or Firefox was your default before. Edge Browser is faster than Chrome or Firefox, but doesn’t supply the degree of extensibility that it is competitors offer. If you are a Chrome or Firefox user, you’ll want to improve your default right away.
1. Navigate to settings.
2. Click System.
3. Select Default apps from the left pane.
4. Click the Microsoft Edge icon underneath the “Web browser” header.
5. Select the browser you would like as the new default (ex: Chrome).
Delete the Windows.old Folder
If you upgraded from Windows 7 or 8 to Windows 10, the installation program keeps a copy of your previous version of Windows around, just in case you wish to roll back. However, those files, which live in a folder called Windows.old, take up 15 to 16GB of disk space. If you are planning to stay with Windows 10 (and you should), there is no reason to help keep these archived files around. Unfortunately, deleting them isn’t quite as simple as dragging the Windows.old folder into the recycle bin.
1. Visit the control panel. You can get there by hitting Windows + X deciding on control panel.
2. Open Administrative Tools.
3. Launch Disk Cleanup.
4. Click Ok, making sure that the C drive is selected.
5. Click Clean up System Files.
6. Click Ok again.
7 Check all of the boxes around the “Files to delete” menu, especially “Previous Windows Installations” and “Temporary Windows Installation Files.” Click Ok.
8. Click Delete Files. It will require a few minutes to compl
9. Click Yes to verify.
It will require a couple of minutes to complete the deletion process.
Speed Up Your Shutdowns
If you are of sufficient age to have used a PC in the 1990s, you’ll remember how fast it turn off; you simply hit the power button and walked away. Though Windows 10 boots very quickly, it may still require sometime to shut down or restart. Part of the concern is that the OS waits a long time before exiting any programs you have running.
In some instances, Windows 10 even stops and waits indefineitely for you personally force close open applications. If you chose to reboot your pc, you most likely meant to close that Wordpad window using the readme.txt file open in it. You are able to speed up your shutdowns by setting Windows 10 to kill processes and applications quickly.
1. Open regedit by hitting Windows + R and typing “regedit” into the box.
2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. Open WaitToKillServiceTimeout.
4. Set the worth to 2000 and click Ok. This is the period of time, in milliseconds, that Windows waits to kill an unresponsive service. Most sites recommend you place this no lower than 2000 so the system has serious amounts of shut these processes without creating a problem.
5. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop.
6. Create a String Value and name it WaitToKillAppTimeOut. You can create a string value by right clicking within the right pane and selecting New > String Value.
7. Open WaitToKillAppTimeOut and hang it to 2000.
8. Create a String Value called HungAppTimeout and set it to 2000.
9. Create another Sting Called AutoEndTasks and hang it to 1.